Troubleshooting; Technical Features - Teesa TSA3020 Bedienungsanleitung

10
• Always unplug the appliance before cleaning.
• Do not immerse the base in water or any other liquid.
• Wipe the housing base down with a damp cloth, then dry it.
• Wash the food chute and cones in warm, running water, then dry it.
• Be careful while handling the cones - their blades are extremely sharp.
• Should the plastic parts become stained with food (such as carrots), rub them with a
cloth dipped in a cooking oil and then clean as usual.
• After use, remove all cones from the food chute.
• Clean the device after each use. Make sure the appliance is dry before storing it.
Problem
Food is not sliced or
shredded uniformly.
Appliance will not
turn on.
Food is not
processed at all, or
very thoroughly.
EN
5 cones for different use:
• Fine slicing cone
• Fine shredding cone
• Grating cone
• Slicing cone
• Shredding cone
Power: 150 W
Voltage: 220-240 V, 50-60 Hz
CLEANING
STORAGE

TROUBLESHOOTING

This may be caused by placing too much food into the food chute, or pressing
too hard on the pusher.
1. Check if the mains supply functions correctly.
2. Unplug the appliance and let it rest for approximately 4 minutes. Plug it
back in, and press On. If the appliance still does not respond, contact with an
authorized service point.
1. Cheese
Cheese is easier shredded when chilled, and processed immediately after
being removed from the refrigerator. Softer cheeses, like Mozzarella, should
be placed in the freezer for 30 minutes before processing.
2. Fruits and vegetables
Fruits and vegetables are easier to process when are firm, and not overly ripe.
Vegetables with high water content should be kept in the refrigerator prior to
processing.

TECHNICAL FEATURES

Solution
Owner's manual