Switching On/Off - Fontastic Rokka Bedienungsanleitung

Caution: Charge the device fully before using it for the first time.
Power adapter not included. The power supplied by the charger must be between a minimum of 5 watts and a
05 10
maximum of 10 watts to achieve the maximum charging speed.

Switching on/off

Switching on: Press and hold the on/off button (12) until the device switches on.
Turning off: Press and hold the power button (12) until the device turns off.
Pairing
The speaker must be paired with a Bluetooth
1. Turn on the speaker; the device will immediately enter BT mode. Use your Bluetooth
are to be played, to search for Bluetooth
2. Select the "Rokka" speaker from the list of devices found and confirm the connection.
Your device is now paired with the Fontastic
Note: Once a device has been successfully paired, the speaker will automatically connect to the last paired device
the next time it is used. The product can only be connected to one Bluetooth
If you are unsure how to pair your Bluetooth
a Bluetooth device without a display, switch it to pairing or connection mode and wait a few seconds until the
®
connection with the Rokka has been established.
Note: For wireless music streaming, the audio source must support the A2DP and AVRCP profiles in order to play
and control music via the Rokka.
Mode button
Press the mode button (13) to switch between Bluetooth, USB, SD card, and AUX connection playback.
Music control
(BT mode, MicroSD card mode, USB mode)
To play or stop music, briefly press the start/stop button
To skip to the previous track, briefly press the Previous Track button
To skip to the next track, briefly press the Next Track button
Playing music from USB storage
Insert a USB storage device into the USB port of the Fontastic Rokka (2). USB mode starts automatically. "USb" is shown
on the display. The files stored on the device will be played.
Playing music from a TF card
Insert a TF card into the card slot (3) of the Fontastic Rokka. TF card mode will start automatically and "Tf" will appear on
the display. The files stored on the device will be played.
Aux mode
Connect a 3.5 mm audio cable to the aux input (4) of the Fontastic Rokka. Press and hold the MODE button to enter aux
mode. "LINE" will appear on the display. The music played on the connected device will be output via the speaker.
In AUX mode, the music can be muted using the start/stop button
.
Note: The music control buttons have no function in Aux mode. The music must be controlled on the audio
source.
Sound settings / volume
Various sound settings can be adjusted. To do this, press the menu button (15). The settings are adjusted using the
volume control.
Bass: "b" appears on the display. The bass intensity can be adjusted.
Treble: "t" appears on the display. The treble can be adjusted.
Echo: "E" appears on the display. The microphone echo can be adjusted.
Microphone volume: "N" appears on the display. The microphone volume can be adjusted.
Volume: "V" appears on the display. The volume can be adjusted.
device in order to wirelessly transfer and play audio files.
®
audio devices (Bluetooth
®
Rokka speaker. An acoustic signal will sound to confirm.
®
device, please refer to the device's user manual. If you are using
®
.
.
device, from which the audio files
®
on the audio source must be activated).
®
device at a time.
®
.
.
GB
6