Power On/Off - fontastic Bows Bedienungsanleitung

can be connected to a computer or standard USB
power adapter. The status LED (3) will light up during
charging. When fully charged, the LED will turn off.
Attention: Charge the speaker for at least 2.5
hours before first use.
Note: If the battery power is less than 20%,
a warning will be given.

Power On/Off

Power On: Press and hold the power button
approximately three seconds. The LED lights up and
an acoustic signal sounds.
Power off: Press and hold the power button
approx. three seconds. The LED goes out and an
acoustic signal sounds.
Pairing
The speaker must be paired with a Bluetooth
before it can be used for wireless music streaming.
1. Switch on one of the speakers. A signal sounds,
the speaker is in pairing mode.
2. Search for Bluetooth
Bluetooth device from which audio data is to be
®
played.
3. The searching Bluetooth
has found the „Bows" speaker. Confirm the pairing
with „Bows". A successful connection is confirmed
by the voice announcement.
for
When using a Bluetooth
switch it to pairing mode and wait a few seconds until
the connection with the speaker is established.
for
®
audio devices with your
®
device indicates that it
®
device without display,
®
GB
device
8