Noise/Vibration Information; Mounting And Operation; Initial Operation; Battery Charging - Bosch AdvancedHedgeCut 36 Originalbetriebsanleitung

OBJ_BUCH-948-007.book Page 17 Wednesday, December 21, 2016 10:28 AM
Cordless hedge trimmer
Battery Charger
Article number
Charging current
Charging period (battery discharged)
– 1.3 Ah
– 2.0 Ah
Allowable charging temperature range
Weight according to EPTA-Procedure 01:2014
Protection class
* depending on the battery pack being used
 Do not use 4.0 Ah battery with this power tool.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level 67 dB(A); sound power level 87 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-15:
2 2
a =2.5 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Mounting and Operation

Action
Delivery Scope

Battery Charging

Inserting the battery
Battery Charge Indicator
Bosch Power Tools
EU
UK
AU
A
min
min
°C
kg
Action
Starting
Stopping
Working Advice
Removing the Battery
Maintenance and Cleaning
Storage and Transport
Selecting Accessories

Initial Operation

For Your Safety
 Warning: Switch off and remove battery from machine
before adjusting or cleaning.
 The blades continue to move for a fraction of a second
after the hedgecutter is switched off.
 Do not touch the moving blades.
Battery Charging
 Do not use other battery chargers. The supplied battery
charger is designed for the Lithium-Ion battery in your gar-
den product.
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 45 °C. In this manner, a high battery service life is
achieved.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
Figure Page
battery charger before using your power tool for the first time.
1 280
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
2 280
does not damage the battery.
2 280
3 280
English | 17
Advanced AHS 54-20 LI
HedgeCut 36
AL 3640 CV AL 3640 CV
Professional Professional
2 607 225 099 2 607 225 099
2 607 225 101 2 607 225 101
2 607 225 103 2 607 225 103
4.0
(80 %) 100 % (80 %) 100 %
(15) 45 (15)
(25) 45 (25)
0– 45
1.0
/ II
Figure Page
4 281
4 281
5 281
6 282
6 282
7 282
8 282
F 016 L81 406 | (21.12.16)
4,0
45
45
0– 45
1,0
/ II