CEA SIXTY Bedienungsanleitung Seite 52

MAINTENANCE
The appliance is built in a workmanlike
manner. Its durability and electrical and
mechanical reliability
by correct functionality
maintenance.
Before carrying out any cleaning or
maintenance operation, disconnect the
appliance from the mains power supply by
switching off the product or system switch.
Before any operation make sure the unit is
completely cool. Clean the outside surface
with a soft cloth.
To keep the appliance beautiful and long-
lasting, it is recommended to clean it on a
regular basis using neutral cleaning soaps
recommended for cleaning stainless steel.
Rinsing and drying are fundamental aspects
to prevent the formation of limestone
deposits. Do not use sanitizers such as
bleach, chlorides, ethylene oxides, nonionic
surfactants that could damage the surface of
52
are guaranteed
and regular
the products. Do not use detergents based
on hydrochloric, hydrofluoric, phosphoric
and muriatic acid. Neutral pH detergents
are preferred and, if it is necessary, use
diluted isopropyl alcohol or diluted sodium
carbonate. The latter is a multi-purpose
ecological detergent: it does not contain
surfactants, phosphorus, dyes or perfumes.
Avoid contact of the steel surfaces with
vapors coming from acid products (muriatic
and hydrochloric) or that have a sodium
hypochlorite, bleach or ammonia base.
Do not use scouring pads or brushes of
any kind or abrasive detergents containing
microscopic particles that can scratch the
surfaces and ruin the satin and polished
surface finishing. Wet iron objects left
on the steel surfaces can release ferrous
deposits that can damage the products.
It is recommended to use only original
CEADESIGN spare parts.