CEA SIXTY Bedienungsanleitung Seite 28

MODULARITY AND REPEATABILITY
The modular heated towel warmer is made
of AISI 304 stainless steel and powered by
low-voltage electricity (24 Volt).
It is available in two different lengths
(580 mm and 1000 mm) and can be installed
both horizontally and vertically. The towel
warmer from the SIXTY collection easily
adapts to any domestic environment,
finding the right modularity depending
on the available space and the needs of
the project. The universal installation
determines maximum modularity and/or
repeatability. Where the built-in parts are
installed in-line, the minimum distance
between two elements will be 150 mm.
28
Each composition is combined with a
dedicated power supply that supports
up to 80 Watts and is connected to a single
power button.
If you wish to add other elements to the
composition, it is necessary to calculate
that the sum of the consumption of the
elements does not exceed 80 Watts. If
the new composition exceeds 80 Watts,
it is necessary to add a new power supply
(TRS02).
Junction box and electrical cables are at the
discretion of the installation technicians.
The towel warmer is compatible with
home automation systems.
90°
180°