Navigation - A-Rival Nav-Pnf Bedienungsanleitung

a»rlvRL
COMPONENTS
Charge Indicator
Reset Button
Mini-USB Connector
microSD Slot
TMC connector

NAVIGATION

Tap the "Navigation" button on the main menu
to enter into the navigation mainmenu to start
navigator.
Device Settings
Tap the "Settings" button on the main menu to display the Device Settings
menu.
The following sections describe these buttons and their functions.
DATE/TIME
VOLUME
Touch Screen
Speaker
ONIOFF Switch(Power
(1)
Lanquago
GEE:
Tap the item of needing to modify, Through
clicking a andQon thecalendar, y ou
can accomplish easily to adjustment of
year, month and day.
2. Uniformity, clicking zand@on the
calendar, you can accomplish easily to
adjustment of hour, minute and second.
3.Tapthe— buttonto savethechanges
and go back to the previous menu.
Taptheknob• to adjust t hevolume.
Todecrease thevolume, t ape .
Toincrease thevolume, t ap.l.
(3)
1
OPERATION
Connect one end of the car charger
the power connector of your device.
Connect the other end to the cigarette
lighter in the car to power and charge your
device. The indicator on the car charger lights in green to indicate that power is
being supplied to your device.
Inserting a microSD Card with a navigation map.
Pen
Press the ON/OFF switch for several
Your device will automatically turn on.
The Opening screen appears, frist.
The Main Menu appears as shown right.
Button)
TIMEZONE
TIMEZONE
(Gur west
BACKLIGHT
Atto
3
2
6
to
seconds.
(2)
To set the time in your time zone correctly,
tap the time zone button on the bottom.
Your time zone is pre-set for Germany
(GMT +1 ,see picture below). Confirm your
setting by pressing the 0K button. You are
returned to the prior menu now.
Winter/Summer time setting will
be automatically changed.
Tap the knob's] to adjust the backlight.
To decrease the backlight,
To increase the backlight, tap S].
Tap the knob , the device will enter into
an auto adjustment backlight state.
Now, if the environment beam is very bright,
the display screen of the device will become
light, if the environment beam is very dark,
the display screen of the device will become
dark. When the device is opening, if you
don't operate it for a while, the device will
become dark to enter into a saving electricity
state.
(4)
•