Herunterladen Inhalt Inhalt Diese Seite drucken

Qrs With M5 Threads / How To Open The Steering Wheel; Initial Operation; General Operation - Ascher Racing F28-Sc V2 Produktanleitung

Simucube wireless-lenkräder für rennsimulatoren
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

QRs With M5 Threads / How to Open the Steering Wheel

⎯ not as straight forward as previous QRs due to both parts being M5 threaded
⎯ M5 threads of one part need to be bypassed using captive screws
⎯ through hole M5 threaded QRs (e.g. HRS Xero Play QR) → bypass the QR part
⎯ blind hole M5 threaded QRs (e.g. NRG) → use captive screws from inside the wheel casing
o open wheel rim by removing 7 x front plate bolts (2.5mm allen key)
o screw in 5 x captive screws completely until threads do not intersect anymore
o attach QR by turning each bolt ¼ turn in a circular pattern
o attach front plate – make sure not to squeeze shifter cables

6. Initial Operation

open True Drive/ Simucube Configuration Tool and go to Simucube Wireless Wheels tab
set checkmark: Connect automatically to paired devices
switch on steering wheel (ON-OFF switch on the rear side)
double click Ascher Racing B24
wheel is now paired, connected and shows up in the Overview tab
check connection signal quality (Overview tab) for a full rotation of the steering wheel
signal quality must be above 20% at all times for perfect operation

7. General Operation

⎯ when switched ON, the wheel will go into discovery mode for 30s (blinking LED)
⎯ if Simucube is switched on, it connects automatically and shows up in the Overview tab
⎯ LED will indicate successful connection by blinking three times
⎯ SC2 will indicate connection/ disconnection by an audible beep (if checked in the Hardware Settings
tab)
⎯ alternative connection:
o pull both paddle shifters simultaneously to connect immediately
o pull both paddle shifters simultaneously for 5s to disconnect
⎯ after driving session, it is recommended to switch-off/ disconnect the wheel to avoid constant
battery drain in specific circumstances when a connection to SC is active
⎯ expected battery life of 2 - 3 years on heavy daily usage
⎯ low battery voltage: True Drive will show a warning message, SC2 will play an audible beep
⎯ remaining energy will still last for many days to have time for replacing the battery
⎯ to swap batteries, open access window on the rear side (1.5mm allen key required)
ENGLISH
| GERMAN
7 |
p a g e

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis