Specifications - Eibenstock DSS 25 A Originalbetriebsanleitung

Specifications

Rated voltage:
Power input:
Max. power input:
Frequency:
Max. air flow** :
Max. low pressure**:
Sound pressure
**on the hose
Connection cable for appliance with socket: H05VV F 3 x1,5 (DSS 25 A / DSS 50 A)
Safety instructions
Before using the unit, users should be given information,
instructions and training in how to use the unit and the
substances it should be used for including safe ways to
eliminate the suctioned material.
If the connection cable gets damaged or cut during use,
do not touch it, but immediately pull the plug out of the
socket, Never use the tool with a damaged connection
cable.
The tool must neither be wet nor used in humid
environment.
The vacuum device is designed for industrial use. Ideal in combination
with an electric tool, on building sites, in workshops, etc.
Warning !
Vacuum devices are not suitable for aspiration/clearing of toxic dusts.
Class M vacuum devices are suitable for aspiration/ clearing of dry,
non-combustible dusts, non-combustible liquids, wood dusts and
hazardous dusts with workplace limit values of ≥ 0.1 mg/m³.
Warning !
Persons (including children) who are, due to their physical, sensory or
intellectual abilities or lack of experience or knowledge, unable to safely
use the vacuum device should not use it without supervision or
instruction by a responsible person.
Particular caution is advised with children, elderly or infirm persons.
Do not point nozzle, tube or hose at people or animals.
Danger !
Do not operate the vacuum device where there is danger of explosions.
English
DSS 25 A / DSS 50 A
220 - 240 V~
1200 W
1400 W
140 m /h/SE
3
225 hPa/SE
H07RN F 3x1,5 (DSS 35 M iP)
19
DSS 35 M iP
1400 W
1600 W
50 – 60 Hz
151 m
259 hPa/SE
69,5 dB (A)
/h/SE
3