Unpacking And Installation; Electrical Connection; Start-Up The Cabinet; Maintenance And Cleaning - Tefcold Atom Maxi Mk2 Benutzerhandbuch

Unpacking and
installation
Electrical
connection
Start-up
the cabinet
Maintenance and
cleaning

Service

6
Remove the wooden pallet and all packing material.
To ensure correct function it is important that the cabinet is level.
Leave at least 10 cm of free space around the cabinet (wall or other cabinets)
for proper ventilation.
10cm
Check the cable and plug for damage before use.
Only connect the product to a fused and properly earthed socket.
Voltage: 230 Volt – 16A – 50Hz.
Before use, we recommend that the cabinet is cleaned, see the section on

maintenance and cleaning.

Clean the product with a soft cloth Use lukewarm water with mild soap.
Do not use aggressive cleaning materials, such as scouring pads, abrasives or
chlorine. Do not use water at or near electrical components.
Clean the condenser every week with a vacuum cleaner or soft brush.
The condenser is the black grate located behind the machine door.
The door is equipped with a magnetic seal and is easy to open/close.
The cooling system is a hermetically sealed system that does not require fre-
quent service inspections.
If the cabinet fails to cool, check if the reason is a power cut.
Repairs should only be carried out by a skilled technician who is familiar with the
product.
WWW.TEFCOLD.COM
10cm
6