Preparing For Pumping; Mains Operation - Medela Freestyle Gebrauchsanweisung

6. Preparing for pumping

Warning
18 18
re 6.1 Mains operation:
I Follow the exact order of the steps.
l Only use the mains adapter that
comes with Freestyle.
l Make sure the voltage of the mains
adapter is compatible with the
power source.
Note
l Do not use force to push the battery
into the battery compartment.
I Do not insert the battery while the
pump is on mains.
i
Info
I You can operate the Freestyle
breastpump via battery or mains.
If you want to use the battery, you
must charge it before first use.
re 6.2 Battery operation:
l The battery starts charging as soon
as you connect the pump to a power
source.
l You can use the pump during
charging.
l Do not disconnect the mains adapter
until charging is completed.
I If possible, do not remove the
battery from the motor unit.
Removing the battery requires a
recharging time of up to 24 hours.
I Do you plan to store the pump for
an extended period of time? Then it
is better to remove the battery from
the unit.
l If Freestyle has been inactive for
30 minutes, it automatically switches
off.

6.1 Mains operation

1
To operate the pump via mains
power, uncover the power
socket on the bottom of the
motor unit. Insert the power
adapter (the small round plug)
into the socket.
2
Insert the battery into the
battery compartment with
the "This Side Down" arrows
pointing towards the compart-
ment. The gold contacts on
the battery must touch the
contacts in the compartment.
Finally, put the battery cover
back on.