Herunterladen Inhalt Inhalt Diese Seite drucken

Typographical Conventions - JUMO mTRON B 70.4020.4 Montageanleitung

Analog-eingangsmodul
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1 Introduction

1.3 Typographical conventions

Warning
signs
V
Danger
This symbol is used when there may be danger to personnel if the instructions
are disregarded or not followed accurately!
A
Warning
This symbol is used when there may be damage to equipment or data if the
instructions are disregarded or not followed accurately!
Note signs
H
Note
This symbol is used if your special attention is drawn to a remark.
v
Reference
This symbol refers to further information in other manuals, chapters or
sections.
1
abc
Footnote
Footnotes are remarks that refer to specific points in the text.
Footnotes consist of two parts: the marking in the text, and the footnote text.
The text markings are arranged as continuous raised numbers.
The footnote text (in a smaller typeface than the main text) is placed at the
bottom of the page, and starts with a number and a full stop.
h
Action
This marks the description of an action to be performed. The individual steps
are indicated by the asterisk, e.g.
h Switch off the supply
h Pull the connectors off the module
6
The signs for Danger and Warning are used in these installation instructions
under the following conditions:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mtron 704020/1Mtron 704020/0

Inhaltsverzeichnis