Introduction; Preface; Delivery Package - JUMO mTRON B 70.4020.4 Montageanleitung

1.1 Preface

!
H
Trademarks

1.2 Delivery package

This document describes the installation, displays and controls, as well as the
electrical connections.
Comprehensive information can be found in the System Manual, which is
intended for equipment manufacturers and users with appropriate technical
training. It describes the functional range of the JUMO automation system and
its modules, and provides all the necessary information for project design and
commissioning.
Please keep these installation instructions in a place that is accessible at all
times for the installation and operating personnel.
If any problems should arise during commissining, please do not
make any unauthorized manipulations on the instrument. This
would endanger your rights under the warranty. Please contact
your nearest sales office or the main factory (see below).
LON and Neuron are registered trademarks of Echelon Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Check every delivery to make sure that it is complete and undamaged.
If anything is missing or damaged, please contact the nearest JUMO office
or the main factory.
The delivery consists of:
- the module (or modules),
- Installation Instructions, and
- plug-in screw terminal strips.
Please help us to improve these installation instructions.
Your suggestions will be welcome.
Phone in Germany
from abroad (+49) 661 6003-0
Fax in Germany
from abroad (+49) 661 6003-607
(06 61) 6003-727
(06 61) 6003-508

1 Introduction

5