H-tronic HT200E Bedienungsanleitung Seite 17

TEcHnIcal DaTa
– Operating voltage: 12V DC
– Power consumption: 400 mA max.
– Operating frequency: 868.35 MHz, 869.05 MHz or 869.55 MHz
– Mode: Tip or switch function
– Folow up time relay: 200 ms/500 ms (adjustable)
– Outputs: 8x relay (potential-free)
– Max. load: 250VAC/12A (3000W) or 24VDC/10A
– Max. total load: 3000 W
– Standby current: approx. 50 mA
SafETy InSTrucTIOnS
The following safety instructions are not only for the safety and protection of
the device, but also for the protection of your own safety and health. Please
read and follow them carefully. This user guide contains information about the
installation, service and maintenance of your device. If you should pass the
device to another person, do not forget to include this user guide.
In no event will liabilities be taken for consequential, incidental, direct or indirect
damages resulting from improper use of the device according to the user guide.
All persons using, handling, installing, servicing and maintaining this device must
be trained and qualified for handling, installing and repairing this device and
follow this user guide. This device may only be opened or repaired by a person
authorized and qualified to do so and/or who has the knowledge of electrical
safety regulations. Do not leave the packaging material lying around. Children
might play with the plastic bags and risk suffocation.
– This product is not a toy and not suitable for infants and children. Infants and
children cannot assess the risks involved, when dealing with electrical devices.
– Transmitters may only be operated by persons instructed in operating the
device
– Do not expose the device to direct sunlight.
– Protect the transmitter from humidity and und dust.
– Admissible ambient temperature during operation: –10 °C to 40 °C
8-Channel Receiver HT200E
| 17