H-tronic HT200E Bedienungsanleitung Seite 16

8-cHannEl rEcEIVEr
HT200E
Art.- No. 16 18 250
THE 8-cHannEl rEcEIVEr HT200E
and tamper free remote control. The connection between the transmitter and
the receiver is encrypted by AES128 and contains a "rolling code". This makes
each data package sent to the receiver unique and non-repeatable. The
learnable receiver allows the operation of up to 32 different transmitters that
can be easily programmed into the receiver. The 8 relay outputs with high
switching capacity have a changeover contact that may be freely connected.
The receiver also allows you to adjust the frequency and the delay time of
the relays. The detachable antenna can optionally be extended, allowing
higher flexibility during installation. Due to the characteristics of the device,
this remote control system is ideal for general installation purposes and alarm
technology – from the comfort of your chair.
highlights
– Control of doors, gates, barrier systems and electrically controlled windows.
– Control of lighting circuits and systems; of pumps, air conditioning and water
systems; of electrical, hydraulic and pneumatic systems.
– More safety through the rolling code encryption (AES128 security principle).
– Operation with up to 32 trans mitters which can be programmed in the
receiver through keypress
– The LED function indicators are located on the front plate of the device,
allowing you to see the status of the receiver at a eglance. Installation
maintenance and testing are easy to do and inexpensive.
– A free range of approximately 200 m under normal operating conditions.
– Settings will be saved in case of power failure.
16 |
Highlights
has been designed as a tap-proof
gB