Placement Options - Ultimea Apollo S80 Benutzerhandbuch

7 CONNECT TO TV VIA OPTICAL / AUX
OPTICAL
DIGITAL AUDIO
OUT
OPTICAL
OPTICAL
OPTICAL
OPTION 1: OPTICAL
Make sure the TV's port is OPTICAL OUT, connect
1
both sides of the cable to OPTICAL, for both the TV and
the soundbar.
Make sure the optical plug is inserted correctly as it
2
shows in the picture. Do not insert the plug upside
down and break the optical.
Note: lf audio is coming from the internal TV speakers,
mute or minimize the TV volume.
In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
8 CONNECT TO BLUETOOTH
Press the " " button on the soundbar or press the "
1
Go to the Bluetooth setting on your phone, find and select "Apollo S80" to connect the soundbar.
2
Note: If it's already in the Bluetooth mode and connected, press and hold "
device and choose to connect to a new device manually on your mobile phone / PC / TV.

9 PLACEMENT OPTIONS

e
Batteries Not Included
Detached and stand on base
AUDIO OUTPUT
OPTION 2: AUX
Connect the 3.5mm to RCA audio cable to connect to
1
your TV's RCA AUDIO OUT port.
Make sure the color of the cables ends matches the
2
color of the TV ports.
Note: Please remember to unplug the AUX cable from
TV and Soundbar when you want to switch other mode.
" button on the remote control to enter Bluetooth pairing mode.
" button for 3 seconds to disconnect current
AUX
AUDIO IN
L
R
L
R
AUX
e
Apollo S80
05