Setting Up The Kameleon - One for All URC-8210 Bedienungsanleitung

Setting up the KAMELEON 10

(How to set up the KAMELEON 10 to control your devices)
Example: To set up the KAMELEON 10 for your television:
1. Make sure your television is switched ON (not on standby).
2. Find your device code in the Codelist (page 211-239). Codes are listed
by device mode and brand name. The most popular code for each brand is
listed first. If your brand is not listed at all in the code section, try the Search
Method on page 13.
3.
4.
5.
6.
_ _ _ _
7.
8.
9.
(x2)
- Most TV's do not switch back on pressing the POWER key. Please try
pressing "the CHANNEL+" key to switch your TV back on.
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- To set up your other devices, follow the same instructions above, only press
the appropriate device key during step 5. Please refer to the "device keys"
section on page 7.
-
To set up for ex. a 3rd television or 2nd satellite receiver etc. see page 18.
- Remember to press the correct device key before operating your device.
Only one device can be assigned to a device key.
12
Press and hold down the MAGIC key (for about
3 seconds) until the rabbit comes out of the hat
(the screen will change to the setup screen).
Press the DEV SET key.
Press and release the TV1 key to select the device type you like
to setup.
Enter your four-digit code using
the number keys. The animated IR Indicator
will blink twice.
Now, aim your KAMELEON 10 at your television and try
the following keys to test if the KAMELEON 10 will work with
your device;
• CHANNEL +, CHANNEL-
• VOLUME +, VOLUME -
• MUTE
• POWER.
If your device is responding, press OK to save the code. If
your device does not respond, just enter the next code listed
under you brand. If none of the codes listed for your brand
operate your device, then try the Search Method described on
page 13.
Press ESC twice to return to user mode (all keys are
displayed), OR press a device key to select the next
device you like to setup (continue with step 6).
WWW.ONEFORALL.COM