El" Screen Brightness Adjustment; El" On Time Setting - One for All URC-8210 Bedienungsanleitung

"EL" Screen brightness adjustment

To increase or decrease the brightness of the KAMELEON 10 "EL" screen:
1.
2.
3. ->
->
4.
- If you want to increase or decrease the brightness you first have to de-activate
the light sensor (Simply follow steps 1 - 3 on page 4). The four blinks during step 3
will confirm that the light sensor is de-activated.
- Increasing the brightness of the KAMELEON "EL" panel can decrease the battery
life. Battery life varies from 3 - 12 months (depending on brightness setting and
usage).

"EL" On time setting

To change the time (default: 8 sec.) that the KAMELEON 10 "EL" screen will be ON,
after each keypress during use of the remote (not programming mode):
1.
2.
3.
4.
Selection
1
2
3
4
5
WWW.ONEFORALL.COM
The Keypad
Press and hold the MAGIC key until the rabbit
comes out of the hat (the screen will change to
the setup screen).
Press BRIGHT.
To increase the brightness of the "EL" screen press
and hold CH+.
To decrease the brightness of the "EL" screen press
and hold CH-.
Press ESC to store the brightness setting and return to the
setup screen.
Press and hold the MAGIC key until the rabbit
comes out of the hat (the screen will change to
the setup screen).
Press OTHER.
Press 9 7 8.
Press 1, 2, 3, 4 or 5 (e.g. 1 = 4 seconds) depending on your
choice, see table below. The animated IR Indicator will blink
twice and the remote will return to the setup screen.
"EL" On Time
4 seconds
8 seconds (default)
12 seconds
16 seconds
20 seconds
5