Setting Up The One For All; Direct Code Set Up - One for All URC-7930 Bedienungsanleitung

Downloaded from www.Manualslib.com

Setting up the ONE FOR ALL 3

Before you start, please read these instructions carefully

Direct code set up

Example: To set up the ONE FOR ALL 3 for your television:
1
139
device is switched on (not on standby).
2
3
_ _ _ _
4
5
press POWER If your device switches off, the ONE
FOR ALL 3 is ready to operate your device.
6
7 If your device does not respond, follow steps 1 to 5 with
each code listed for your brand. If none of the codes listed
for your brand operate your device, or if your brand is not
listed at all, try the search method described on page 6.
Important notes:
WWW.ONEFORALL.COM
manuals search engine
Make sure your
TV key
hold down M (MAGIC) key
(four-digit device code)
123 -
x2