6.4
Measurements
NOTE
The menu item
Measurements
store measurements quickly. Use
to shorten your time on the track. You can re-open
6.5
Settings
6.5.1 Bluetooth
6.5.1.1 Select
RAILSTRAIGHT
serves as a place to
Measurements
1.
Shows RAILSTRAIGHT to which you
are currently connected.
the stored measurements any time, edit the details
and then add the measurements to a project.
Press a Measurement in the list to edit the
details and add the measurement to a project.
The Measurement details screen is displayed.
There you can edit the measurement details and
add the measurement to a project. After you
have added the measurement to a project the
measurement is deleted from Measurements.
NOTE
If no RAILSTRAIGHT is displayed here or not
the required RAILSTRAIGHT, press the
to select the required RAILSTRAIGHT.
Proceed as follows:
1.
Press the button.
If Bluetooth is not turned on, a dialog box
is displayed. The dialog informs you that
the app is trying to turn on Bluetooth.
2.
Confirm the dialog with Allow.
Bluetooth is now turned on. A list of
RAILSTRAIGHT devices is displayed.
3.
Select the RAILSTRAIGHT from this list with
which you would like to measure.
button
125