Proper Use - comfortel WS-400 IP Betriebsanleitung

Important Information

Proper Use

Important: Auerswald products are not designed, manufactured,
or intended for use or resale, in environments that require fail-
safe performance, such as in the operation of life-support sys-
tems and/or nuclear facilities. Our products can only be used for
these purposes with prior written permission from Auerswald in
each individual case.
Important: Improper use may, for example, cause functional
restrictions or interference, the destruction of the device or, in a
worst-case scenario, personal injury.
If you are still uncertain about how to use the product properly
after reading the chapter below, please contact your special-
ised dealer.
Read the instructions for the device and keep them for future
reference.
The COMfortel WS-400 IP is an IP DECT Singlecell Server
designed to set up an IP DECT Wireless System in enclosed
buildings. The device can be upgraded to an IP DECT Multicell
Server by a software activation (fee required). The Comfortel
WS-400 IP Multi, available in the past, is functionally identical to
the COMfortel WS-400 IP with Multicell upgrade.
Components for Singlecell operation:
IP DECT Singelcell Server COMfortel WS-400 IP (the DECT
Base is already included in the server)
COMfortel DECT handsets
Components for Multicell operation:
IP DECT Multicell server COMfortel WS-400 IP
Up to three DECT Bases COMfortel WS-Base (one DECT
Base is already included in the server)
If required, Repeater COMfortel WS-R2/R4 to increase range
COMfortel DECT handsets
The COMfortel WS-400 IP manages all the DECT system's com-
ponents and the IP interface to the PBX.
To run the COMfortel WS-400 IP, you need a SIP-capable PBX,
e.g.:
COMpact 4000
COMpact 5000/R
COMpact 5020 VoIP
COMpact 5200/5200R/5500R
18
COMfortel WS-400 IP - Instructions V05 06/2017