Setting The Lower Limit - Desktronic Home One Montageanleitungen

4.2 Setting the lower limit:

Using the UP or DOWN buttons move the desk to the desired
1
minimum-height position.
Press M button and release.
2
Press DOWN button and release and wait for the display to return
3
Press and hold M button until the display will return
4
The display will automatically return to the selected height. The new
5
lower limit is set.
4.3 How to remove limits:
Press M button and wait for the display to return
1
Press and hold M button again and wait for the display to return
2
The display will automatically return to the height display.
3
The upper and lower limits are now removed.
NOTICE
RESET procedure requires the desk to fully retract (beyond
any lower limit set). Please ensure that you have the proper
clearance below the desk base.
After the upper and lower limits are set, the previous memory positions
may be outside the new range of movement. If so, simply reset the memory
positions.
If you attempt to revise a previously set limits and it's outside of the existing
range, you will need to remove the previously set upper/lower limits first.
24
000
5 -
555
5 -