Install And Replace The Fan Blades; Remote Control; Introduction To The Function Keys Of The Remote Control - Vevor H12 Benutzerhandbuch

Install and replace the fan blades

The fan blades used in this product are divided into A, B, and fan blades. If damaged, please use
the spare fan blades in the accessory kit for replacement.
(1) When installing for the first time, please carefully distinguish the direction of the fan blades.
①
A
(2) Refer to Figure 3, hold the fan blade that needs to be replaced tightly by hand, apply force
outward, remove the original fan blade, and reattach the corresponding new fan blade.
③
(3) Refer to Figure 4, please check if the model of the wind blades on the aircraft is consistent
with the figure. Please install the blades in the correct position, otherwise the aircraft will
not be able to fly normally.

Remote control

Introduction to the Function Keys of the Remote Control

④ Reset / Enter or exit fine-tuning
② Left control lever
(up/down)
⑥ One click takeoff
or landing/
Emergency stop
②
B
④
Front
⑤ Speed gear switching/ Switch light
4
After
③ Right control lever
(forward/backward/
left rotation/right rotation)
① Switch