Optional Accessories - Ricokids Rk-241 Bedienungsanleitung

Unfolding
1. Open the cover. Unfasten the Velcro and separate the mattress from the frame.
2. Spread the four legs of the crib evenly.
3. Pull the sides of the crib to unfold it.
4. Pull up the crib frame in the center section until it locks into place.
5. Push down on the mattress support part until it locks into place.
6. Lay the mattress in the crib, soft side up.
7. Put the mattress Velcro (A) through the holes in the crib (B). Fasten the Velcro fasteners.
8. The assembly is now complete.
Folding
1. Unfasten the velcro of the mattress and then remove it from the crib.
2. Pull the handle in the center of the crib to release the lock. Then lift the base about 25 cm upwards.
3. Press the buttons in the center of the frames to release the locks, then fold the frames down.
4. Fold the crib inward.
5. Place the mattress on the floor with the soft side up. Place the folded crib on top of it. Then wrap it
with the mattress.
6. Put the crib into the cover and zip it up. Folding is complete.

Optional accessories

Accessories may vary depending on the model of the crib.
A. Toy headband
Attach the toy headband to and then press its clamps into the frame of the crib.
B. Changing table
Pull out the parts of the changing table frame and insert them into the fabric as shown in the picture.
Slide the narrow tubes into the wider ones until you hear the characteristic „click". Set the assembled
changing table on the crib by pushing the changing table clamps into the frame.
C. Cradle
Lift the crib and then install the cradle as shown in the drawings. To use the cradle tilt the skids outward
using your foot. Fold them inward if you no longer want to use the cradle.
D. Suspended matress
1. Install the suspension in the crib using the zipper.
2. Secure the zipper buckle to prevent it from coming undone on its own.
3. Slide the frames into the holes in the suspension.
4. Join the two frames together in the center section.
5. Lay the mattress on the suspension.
09