VENDOMNIA LFTENTF02 Original Bedienungsanleitung Seite 7

Check of electrical components
Repair and maintenance to electrical components shall include initial safety checks and
component inspection procedures. If a fault exists that could compromise the safety,
then no electrical supply shall be connected to the circuit until it is satisfactorily
dealt with. If the fault cannot be corrected immediately. If it is necessary to continue
operation, an adequate temporary solution shall be used. This shall be reported to the
owner of the equipment so all parties are advised.
Initial safety checks shall include:
• those capacitors are discharged: this shall be done in a safe manner to avoid possibility
of sparking;
• that there no live electrical components and wiring are exposed while charging,
recovering or purging the system;
• that there is continuity of of electrical grounding.
• Large Capacity
• Movable and Easy to Store
• Built-in Auto Defrost System to protect key working components
• Adjustable Humidity
• Timed Operation
• Quiet Running
• Energy-saving design
Model No.
Rated voltage
Rated Frequency
Max.Rated Input Power
Max.Rated Input Current
Water Tank Capacity
Sound Pressure Level
If you have any further questions, please contact us:
contact@vendomnia.rs
LFTENTF02-50 Refrigerant Charge
AC220~240 Net Weight
50 Hz
Maximum suction/exhaust side
working pressure
650W(30ºC,RH80%)
3.1A(30ºC,RH80%)
Maximum permissible pressure on the
high/low pressure side
5.5L
Heat exchanger maximum allowable
≤52dB(A)
pressure
FEATURES
SPECIFICATIONS
R290 230g
36kg
0.7MPa/3.2MPa
3.2 MPa
3.2 MPa
EN
7