Basic Safety Instructions - Cosinus Cmt R1-1000 Betriebsanleitung

d) Target Group
d) Target Group
The target group for this product and manual consists of skilled personnel,
The target group for this product and manual consists of skilled personnel, who are able
to evaluate their tasks, identify and avoid probable risks due to their technical education, to evaluate their tasks, identify
electro technical knowledge and experience as well as acquirement of relevant electro electro technical knowledge
technical regulations.
technical regulations.
e) Intended Use
e) Intended Use
Persons of the target group shall use the resistor decade only after carefully reading and Persons of the target group shall use the resistor decade only after carefully
understanding of these instructions. understanding of these instructions.
There is a wide range of appliances for this decade needing switchable, simply and There is a wide range of appliances
quickly variable resistors.
quickly variable resistors.
You are out of the intended use at the latest, if you exceed the maximum values given in You are out of the intended
the appe di u der te h i al data . This shall e avoided in any case!
the appendix under "technical
Please note urgently, that even with far lower values you might leave the intended use
Please note urgently,
and damage your decade.
and damage your decade.
All users must get thoroughly familiar with the given warnings, attentions and notices! All users must get thoroughly
2. Safety 2. Safety
a) Basic Safety Instructions a) Basic Safety Instructions
For safe use of your decade, consider the following basic safety instructions:
For safe use of your decade, consider the following
 Before every use check your decade for visible outer damage. Never use a
Before every use check your decade for visible outer damage. Never use a
damaged decade – there is an electric shock hazard, if you connect your damaged
damaged decade —there is an electric shock hazard, if you connect your damaged
decade to voltages higher than 50 V AC rms or 120 V DC! decade to voltages higher than 50 V AC rms or 120 V DC!
 Repairing of your decade shall only be undertaken by authorised enterprise or the
Repairing of your decade shall only be undertaken
manufacturer. Non-appropriate repair may result in severe dangers for the users. manufacturer.
As well as your warranty gets invalid if you open the decade. As well as your warranty


Application of this resistor decade needs basic electro technical knowledge. Application
Intended use comprises the user belonging to the target group.
Intended use comprises
b) Warning and Safety Instructions
b) Warning and Safety Instructions Used
The following warning
The following warning symbols and levels of safety instructions used in this manual:
and avoid probable
and experience
for this decade needing switchable,
use at the latest, if you exceed the maximum
data". This shall be avoided in any case!
that even with far lower values you might leave the intended
familiar
Non-appropriate
gets invalid if you open the decade.
of this resistor decade needs basic electro technical
the user belonging
symbols and levels of safety instructions
[12]
[12]
risks due to their technical
as well as acquirement
with the given warnings,

basic safety instructions:

repair may result in severe dangers for the users.
to the target group.
Used
who are able
of relevant
simply and
values given in
attentions
by authorised enterprise
knowledge.
used in this manual:
education,
electro
reading and
use
and notices!
or the