Simple Troubleshooting - Vevor Yy-R108 Bedienungsanleitung

● Briefly press the [ ] button again to enter the lighting setting.
● Enter 0 or 1 (0 means turn off the lighting, 1 means turn on the
lighting),Take down a disc splitter and quickly press the 【 】 key within
3 seconds of taking it down. The disc splitter light flashes and emits a
beeping sound to indicate that the setup is complete;
● After setting, briefly press the [X] button twice to exit.
TURN ON/TURN OFF
Keypad: It will be turn off after removing the power, and it will be turned on
after plugging in the power.
Pager:
Turn on: It will be turned on when it's on the charging base with power.
Turn off:
1. Putting the pager on the charging base with power.
2. Enter "0" on the keypad and briefly press the [ ] button until the LED
display disappears.
Note: Please turn off the pager when it is not being used to avoid affecting
the battery's life.
CALLING METHOD
1. Enter the desired calling number on the keypad.
2. Briefly press the [ ] button to complete the calling.

SIMPLE TROUBLESHOOTING

*No response from the pager when the keypad is calling:
1. Checking if the calling number is correct.
2. The keypad ID has been changed, it needs to be re-paird with the
pagers.
3. The reminding duration was set to "0" and it needs to be changed to
1-999s.
- 9 -