VEVOR YY-R108 Bedienungsanleitung Seite 10

● Enter the required reminder duration (0-999s), remove a disc extension,
and quickly press the [
extension. The disc extension will flash and emit a beep sound to indicate
that the setting is complete;
● After setting, briefly press the [X] button twice to exit.
4. Setting pager beep mode: (The default is "on".)
● Putting all the pagers on the base and charge them.
● Long press the [
● Briefly press the [ →] button three times until the "F4" is displayed.
● Briefly press the [
● Enter 0 or 1 (0 means turn off the beep, 1 means turn on the beep),Take
down a disc splitter and quickly press the 【
taking it down. The disc splitter light flashes and emits a beeping sound to
indicate that the setup is complete;
● After setting, briefly press the [X] button twice to exit.
5. Setting pager vibrate mode: (The default is "on".)
● Putting all the pagers on the base and charge them.
● Long press the [
● Briefly press the [ →] button four times until the "F5" is displayed.
● Briefly press the [
● Enter 0 or 1 (0 means turn off the vibrate, 1 means turn on the
vibrate),Take down a disc splitter and quickly press the 【
3 seconds of taking it down. The disc splitter light flashes and emits a
beeping sound to indicate that the setup is complete;
● After setting, briefly press the [X] button twice to exit.
6. Setting pager lighting: (The default is "on".)
● Putting all the pagers on the base and charge them.
● Long press the [
● Briefly press the [ →] button five times until the "F6" is displayed.
] key within 3 seconds of removing the disc
] button until the "F1" is displayed.
] button again to enter the beep mode setting.
] button until the "F1" is displayed.
] button again to enter the vibrate mode setting.
] button until the "F1" is displayed.
- 8 -
】 key within 3 seconds of
】 key within