Sartorius Sartocheck 4 plus Betriebsanleitung Seite 27

5 Start
Press this key to start a test.
6 Stop
Press this key to stop a running test.
7 Paper
This key advances the paper in the internal printer.
8 PC keypad
Is used for inputting and starting processes.
9 Home
When this key is pressed, programming is cancelled without saving. The former
test is reinstated and the user is automatically taken back to the Main Menu.
10 End
Press this key to jump to the end of the input line when entering parameters
and data.
11 Page up
Press this key to scroll a page back in the service menu guidance.
12 Page down (toggle key)
Press this key to scroll to the next service menu window.
13 All Test Stop
Pressing the [ ] and [STOP] buttons simultaneously will stop all running tests
on all MultiUnits, as well as any running test on the Sartocheck
tester unit.
Both the keypad and the touch screen can be used to operate Switching Sartocheck
4 plus Filter tester. These two options can also be combined.
Individual menu items can be selected Sartocheck
keys, on the keypad or by pressing the touch screen. Selection from lists is done by
entering the line number or by direct selection on the touch screen.
All dialog boxes are set up so that the operator can tell by the color which part
of the touch screen can be operated, which are the input boxes and which areas are
for information only. Function keys and other keys that can be pressed on the
screen and on the keypad are highlighted in yellow.
Input boxes are white. Non-changeable information boxes or function keys
that have already been activated are highlighted in gray. Selected dialog boxes are
colored blue. Warnings and error messages appear in red.
®
4 plus Filter
®
4 plus Filter tester with function
Function
®
27