General Safety Rules - Vevor Ms36127A3 Anweisungen

Woodworking can be dangerous if safe and proper operating
procedures are not followed. As with all machinery, there are
certain hazards involved with the operation of the product. Using
the machine with respect and caution will considerably lessen the
possibility of personal injury. However, if normal safety
precautions are overlooked or ignored, personal injury to the
operator may result. Safety equipment such as guards, push
sticks, hold-downs, feather boards, goggles, dust masks and
hearing protection can reduce your potential for injury. But even
the best guard will not make up for poor judgment, carelessness or
inattention. Always use common sense and exercise caution in the
workshop. If a procedure feels dangerous, do not try it. Figure out
an alternative procedure that feels safer.REMEMBER: Your
personal safety is your responsibility.
This machine was designed for certain applications only. We
strongly recommend that this machine cannot be modified and/or
used for any application other than that for which it was designed.
If you have any questions relative to a particular application, DO
NOT use the machine until you have first contacted your local
dealer to determine if it can or should be performed on the
product.
WARNING: FAILURE TO FOLLOW THESE RULES MAY
RESULT IN SERIOUS PERSONAL INJURY.
1.FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL BEFORE
OPERATING THE TOOL. Learn the tool's application and limitations as well as
the specific hazards peculiar to it.
2.KEEP GUARDS IN PLACE and in working order.
3.ALWAYS WEAR EYE PROTECTION. Wear safety glasses. Everyday
eyeglasses only have impact resistant lenses; they are not safety glasses. Also
use face or dust mask if cutting operation is dusty.
4.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see

GENERAL SAFETY RULES

- 3 -