4. Specification
Operating voltage:
Power supply:
Current
drain:
Drop-out voltage:
Max.
servo
current
Max.
receiver
current:
Servo
sockets:
Match
channels:
Temperature range:
Dimensions:
Weight:
SensorSwitch:
EMV approval:
CE approval:
Protected design:
The battery
backer
55014-1:2006,
with
approval
2004/1081EG.
The
unit
must
not
4.0 Volt to 9.0 Volt
2 x 2-cell LiPo batteries,
2 x 5-cell NiCd or NiMH batteries,
2 x 2-cell LiFePo batteries (A123)
Power-on state approx. 75 mA
Power-off state approx. 25 PA
approx. 0.25 V
2 x 10 A (stabilised) according to cooling
peak 2 x 20 A
2x1.5A,
24 servo sockets,
3 channels,
-300C
to +750C
136 x 82 x 20 mm (incl. base plate)
150 g
15g
EN 55014-12006
2004/108/EG
DE 203
13 420.6
fulfils
the EMV protective
certificate
dated
be connected
to a mains
7.4 Volt,
peak 2 x 2.0 A
7 channels
12 servos
requirements,
10 February
PSU.
-11
EN
2009.
EMC