In The Matrix - Zopa Matrix Bedienungsanleitung

INSTALLING MATRIX
Placethe MATRIXin a suitable forward-facing position equipped ISOFIXconnection
I.
points. If the vehicle's seat back is adjustable, ensure it is in the upright position.
Extend the ISOFIX connectors (H) by pushing the ISOFIXadjustment handle (J)
2.
and extending the sliders
3. Insert the ISOFIXconnectors (H)to the ISOFIXconnection point in the car. Make sure
that there is a "click" sound and a green indication on both ISOFIXindicators (H).
Push the MATRIX towards the vehicle seat back until there is no space between
4.
the vehicle seat back
Attach the ASIP (M) by locating the side ASIP attachment (C) on the side of the
5.
MATRIX closest to the vehicle door. Press the ASIP button
position.
RESTRAINING
Place your child in the MATRIX,pull out the vehicle seat belt and slot the shoulder
6.
strap through the red shoulder belt guide (L) nearest the belt attachment.
Pull out the vehicle seat belt in front of your child to the vehicle seat buckle. Lock
7.
the vehicle seat belt into the buckle ensuring it "CLICKS"into place.
Place the lap belt through the red side lap belt side guides (F)
8.
9. Slot the lap belt into the lap belt middle guide (E).Although optional we strongly
advise using the middle lap belt guide.
IMPORTANT:Tighten the vehicle seat belt by pulling the diagonal seat belt section,
check that all slack has been
CAR SEAT
and the MATRIX.
YOUR CHILD

IN THE MATRIX

removed from the
18
IN THE VEHICLE
(N) and slide it into
vehicle seat belt.s
CAR SEAT