Charging The Speaker - Xd Collection Magpulse Bedienungsanleitung

SPECIFICATIONS
• Speaker driver (mm)
• S/N Ratio (dB)
• Frequency range (Hz-KHz)
• Continuous playing time
• Charging time
• Output
• Input
• Battery capacity
• Mic function
• BT version
• BT pairing name

CHARGING THE SPEAKER

A full charge by cable takes approximately 1,5 hours and plays continuously
3 hours. Connect the speaker to the Type-C charging cable to charge. When
the LED indicator is RED, the speaker is charging. The LED indicator goes off
when the device is fully charged. The power delivered by the charger must be
between min 2.5 Watts required by the radio equipment, and max 5 Watts in
order to achieve the maximum charging speed
HOW TO USE
1. Power On: Long press the power button to turn on the speaker, you will hear
a tone.
2. P airing: Once speaker is turned on, open your mobile device, search the
w ireless device and select wireless ID 'Magpulse Speaker', It will pair
a utomatically.
3. P lay/Pause: Short press the button to play or pause the music.
4. N ext track/Vol+: Short press to next track, long press to increase volume.
5. P revious track/Vol -: Short press to last track, long press to decrease volume.
6. Power Off: Long press the power button to turn off the speaker.
4
45mm
80dB
200HZ-20KHZ
3 hours
1,5 hours
3W
DC 5V/0.3A
3.7V/400mAh, 1.48Wh
no
5.4
Magpulse speaker