Charging The Speaker - Xd Collection Prisma Bedienungsanleitung

CHARGING THE SPEAKER

Connect the supplied charging cable to the USB-C input and to a USB port
on your power adapter. The charging LED will be red while the device is
take approximately 3 hours. To ensure the longevity of the product, please
store it fully charged if it will not be used for an extended period.
HOW TO USE THE SPEAKER
Turn on the speaker by pressing the power button (1) for 3 seconds. The
minutes, the speaker will automatically shut down to save power. To restart
the speaker, turn it "OFF", wait for about 1 second, then turn it back "ON".
Bluetooth Pairing
Make sure Bluetooth is enabled on your device. On your device, search for
available Bluetooth connections and select "Prisma 16W speaker" from the
list. Once connected, you will hear a sound prompt, indicating a successful
pairing. The next time you turn on the speaker, it will automatically
reconnect to the last paired device.
FUNCTIONS
Power on
Play/Pause music Short press the play/pause button;
Volume up
Volume down
Next track
Previous track
Answer a call
Hang up a call
Reject a call
TWS connection
4
Press and hold the power button for 2 seconds;
Press and hold the power button for 3 seconds;
Short press Volume increase / Next track button;
Short press Volume down / Previous track button;
Press and hold Volume increase / Next track button;
Press and hold Volume down / Previous track button;
Short press the Play/Pause button;
Short press the Play/Pause button;
Press and hold the Play/Pause button for 1 second
Double press the power button to enter into/exit
TWS connection; *2pcs P331.14 are required