Homend JETSTEAM Benutzerhandbuch Seite 25

Temperature display
The temperature indicator will light on while the iron
is heating up. It will turn off when the iron reaches the
selected temperature. The temperature indicator will
turn on and off while the iron maintains the selected
temperature during ironing.
Iron unlock
Place the iron on the heat insulation stand of the unit
base, then push the iron lock to the " " position to
lock the iron to the unit base. Push the iron lock to
the " " position to release the lock, then you can
remove the iron to iron the clothes. Once the iron is
properly locked into the unit base, the entire steam
station can be lifted up by holding the handle of the
iron.
01
Steam trigger
02
After pressing the power button and selecting the
desired steam rate, the steam rate indicator will
stop flashing and start to be steadily on, indicating
that steam can be used for ironing. Press the steam
trigger with a little force and steam will be sprayed
continuously from the base (see Figure 2). When you
release the steam trigger, the appliance can only be
used for dry ironing without steam.
2 3 J E T S T E A M