Technical Specifications; Simplified Eu Declaration Of Conformity - Pni Rc800 Bedienungsanleitung

Remote control pairing procedure with the PNI MAB300, PNI
MAB300LR, PNI MAB400 system
Press the LEARN button on the main board for one second, the indicator LED on the main
board will go out, which means you have entered learning mode.
Press any key on the remote control for more than 2 seconds; the digital screen on the
board will display the remote control number, and the indicator light on the board will
blink 4 times followed by a short beep. The remote control has been learned successfully.
Note: If after pressing the LEARN key, the system does not receive any signal for 5 seconds,
the LED indicator will light up and the system will exit the pairing mode.
Press and hold the LEARN button on the main board for 5 seconds, a short beep will be
heard, and the indicator light will light up to confirm the remote control has been erased.

Technical specifications

Power supply
Channels
Dimensions
Transmission frequency
Transmission power
Working temperature

Simplified EU Declaration of Conformity

ONLINESHOP SRL declares that the PNI RC800 additional remote control for the self-
supporting gate automation kit complies with Directive RED 2014/53/UE and Directive
ROHS 2011/65/EU. The full text of the EU declaration of conformity is available at the
following internet address:
https://www.mypni.eu/products/7388/download/certifications
English
Alkaline battery type 23A 12V (included)
2
60 x 32 x 12 mm
433 MHz
10 mW ERP
-26°C ~ 80°C
4 User manual