Bosch ARM 33 Originalbetriebsanleitung Seite 13

OBJ_BUCH-1996-005.book Page 13 Thursday, January 14, 2016 1:02 PM
It is recommended for increased elec-
trical safety to use a Residual Current
Device (RCD) with a tripping current of
not more than 30 mA. Always check
your RCD every time you use it.
For products not sold in GB:
WARNING: For your safety, it is re-
quired that the plug attached to the ma-
chine is connected with the extension
cord. The coupling of the extension
cord must be protected against splash
water, be made of rubber or coated
with rubber. The extension cord must
be used with a cable strain relief.
The connection lead must be inspected
for signs of damage at regular intervals
and may only be used if in perfect con-
dition.
If the supply cord is damaged, it must
be replaced by a Bosch Service Centre.
Products sold in GB only: Your prod-
uct is fitted with a BS 1363/A approved
electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket
outlets, it should be cut off and an ap-
propriate plug fitted in its place by an
authorised customer service agent.
The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
Bosch Power Tools
Maintenance

Always wear gardening gloves
when handling or working near the
sharp blades.
 Keep all nuts, bolts and screws tight
to be sure that the machine is in safe
working condition.
 Check the grass catcher frequently
for wear or deterioration.
 Examine the machine and replace
worn or damaged parts for safety.
 Ensure replacement cutting means of
the right type are used.
 Ensure replacement parts fitted are
Bosch approved.
 Before storage ensure machine is
clean and free from debries, if neces-
sary clean with a soft, dry brush.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Symbol Meaning
Reaction direction
Movement direction
Wear protective gloves
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Accessories/Spare Parts
English | 13
F 016 L81 374 | (14.1.16)