ARDES AR1PA1/R Bedienungsanleitung Seite 10

WEIGHING
Solids weighing mode
Placethe product on a flat and stable surface. If you are usinga container and want to
l.
reduce it from its total weight, put it first on the scale,even before you turn it on.
Press the Zero/Mode buttonto turn on the product or presson the centerof the scale.
2.
3. Wait until "O" appears on the display.
Setthe desired mode and unit of measurementaccording to the above instructions.
4.
Placewhat you want to weigh on the scale (or insidethe container already placed) and
5.
start weighing. The display will show the weight.
Volume mode (liquids)
Placethe product on a flat and stable surface. If you are usinga container and want to
reduce it from its total weight, put it first on the scale,even before you turn it on.
Press the Zero/ Mode buttonto turn on the product or presson the centerof the scale.
2.
Wait until "O" appears on the display.
3.
Setthe desired mode and unit of measurementaccording to the above instructions.It is
4.
recommendedto usethe specific water or milk modesif what you are weighing is one
of theseliquids.
Placewhat you want to weigh on the scale (or insidethe container already placed) and
5.
start weighing. The display will show the volume.
"TARE" FUNCTION (WHEN THE TOTAL SUM OF ALL LOADS IS >200G)
Two different loads can be weighed consecutivelywithout removingthemfrom the scale. Put
the first load on the scale, you will get the first weight. Pressthe Zero/ Mode buttonto reset
the display reading to O before adding the next load.
The display will show "—"or "Og" each timethe Zero/Mode button is pressed."—" means
that the product is processing,please wait a moment.When "Og" and "T" appear simul-
taneously in the lower part of the display, it meansthat the tare function is active and the
second load can be positioned. In this condition, the total capacity is reduced by the weight
of all loads. By pressingthe Zero/ Mode button,you can see the total weight of the two
loads together. If you want to add more loads, pressthe Zero/ Mode button to resetthe
display to O.
AUTOMATIC POWER
The product will automatically switch off if it is not in operation or if the display showsthe
sameweight for one minute.
OFF
EN