Herunterladen Inhalt Inhalt Diese Seite drucken

Mediblink M510 Gebrauchsanweisung Seite 11

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

 Avoid bathing, drinking alcohol or caffeine, smoking, exercising and eating for
at least 30 minutes before taking a measurement.
 Rest for at least 5 minutes before taking a measurement.
 Remove tight-fitting or thick clothing from your arm while taking a
measurement.
 Remain still and DO NOT talk while taking a measurement.
 During measurement, the cuff should be avoided from being interfered with by
extrusion or other external forces, and it should only be used on people whose
arm circumference is within the specified range of the cuff.
 Ensure that this monitor has acclimated to room temperature before taking
a measurement. Taking a measurement after an extreme temperature
change could lead to an inaccurate reading. It is recommended to wait for
approximately 2 hours for the monitor to warm up or cool down when the
monitor is used in an environment within the temperature specified as operating
conditions after it is stored either at the maximum or at the minimum storage
temperature. For additional information on operating and storage/transport
temperature, refer to section 10.
 During measurement, the cuff should be avoided from being interfered with by
extrusion or other external forces, and it should only be used on people whose
arm circumference is within the specified range of the cuff.
 Cuff may get damaged. Use only cuffs with specified specifications. Use
of other arm cuffs may result in incorrect readings. (See Section 8.6 of this
manual for cuff specifications.)
 Read and follow the "Correct Disposal of This Product" in section 9 when
disposing of the device and any used accessories or optional parts.
AC Adapter (optional accessory): Handling and Usage
 Fully insert the AC adapter into the outlet.
 When unplugging the AC adapter from the outlet, be sure to safely pull from the
AC adapter.
 DO NOT pull from the AC adapter cable.
 When handling the AC adapter cable:
DO NOT damage it. / DO NOT break it. / DO NOT tamper with it.
DO NOT pinch it. / DO NOT forcibly bend or pull it. / DO NOT twist it.
DO NOT use it if it is gathered in a bundle.
DO NOT place it under heavy objects.
 Wipe any dust off of the AC adapter.
 Unplug the AC adapter when not in use.
 Unplug the AC adapter before cleaning this monitor.
EN
11
Inhaltsverzeichnis
loading

Inhaltsverzeichnis