Product Overview; Description; Indications For Use; Warnings - Maxtec R219P86 Montage- Und Gebrauchsanleitung

1.0 PRODUCT OVERVIEW

1.1 Description

The flow meter is intended for use by physicians, respiratory therapists
and other authorized hospital personnal to administer selected doses of
medical gases to a patient.

1.2 Indications for use

This manual instructs a professional to install and operate the flow meter.
This is provided for your safety and to prevent damage to the flow meter.
If you do not understand this manual, DO NOT USE the flow meter and
contact your provider.

1.3 Warnings

• Use flow meters only for their "Intended Use" as described in this
manual.
• ALWAYS confirm prescribed flow before administering to patient and
monitor flow on a frequent basis.
• Flow meters may contain magnetic, ferrous material that may affect
the results of an MRI.
• Read this User Manual before installing or operating the flow meter.
To Reduce the Risk of Fire or Explosion:
• ALWAYS follow ANSI and CGA standards for Medical Gas Products
and flow meters and Oxygen Handling.
• DO NOT use or store oils, greases, organic lubricants or any
combustible materials on or near this Flow meter.
• DO NOT use near any type of flame or flammable/explosive
substances, vapors or atmosphere.
• DO NOT connect to source pressure greater than 100 psi.
• DO NOT smoke in an area where oxygen is being administered.

1.4 Cautions

• Use caution to avoid cross-threading fittings during installation.
• Always use a backing wrench when installing or removing connectors.
!
866.4.Maxtec www.maxtec.com
1