Creality Falcon2 Pro Benutzerhandbuch Seite 33

Operation
•
After placing different materials, you need to use a multi-level fixed focus block to
adjust the height of the laser module.
•
For basic parameter settings of the laser engraving device, please refer to the file in
the TF card titled "GRBL Configuration Parameters."
•
Firmware Upgrade:
You can download the latest firmware version from:
o
https://www.crealitycloud.cn/en/software-firmware/other?type=16
First, back up the files from the original TF card to your computer. Then clear
o
the TF card to avoid lags during the update. Save the newly downloaded BIN
file to the first-level directory of the TF card.
33