Creality Falcon2 Pro Benutzerhandbuch Seite 28

Component Description
One of the triple safety switches.
Safety Lock
Emergency One of the triple safety switches; used for emergency power off.
Stop
Power Switch One of the triple safety switches; used for daily power operations.
Move the laser module in standby or preview mode. Each press moves
Arrow Keys
1 mm. Hold to move 10 mm after beep.
In standby mode, return the laser module to the home position (lower
Home Button
left corner).
Enter/exit frame preview mode when using a TF card for offline work,
Frame Button
repeating movements along X/Y.
Pause or resume a task. Hold for 3 seconds to cancel the current work.
Pause/Play
Button
Insert a TF card with "G-code" to work offline for engraving or cutting
TF Card Slot
tasks.
Connect to computers and other devices.
Type-C Port
Power Interface Connect to the power supply to power the device.
Connect the computer and camera.
USB Camera
Adjustment Adjust the air flow of the air pump.
Knob
Air Pump Connect the air pump to the device for power supply.
Interface
Silicone Tube Connect the air pump to the equipment to transmit air flow.
Port
In AUTO mode, operates with the machine. In ON mode, runs
Fan, Light
continuously when powered.
28