Scott SPLIT MIPS Bedienungsanleitung Seite 7

HOW TO REMOUNT THE SWEAT STOPPER
Remount the sweat stopper by attaching the silicone membrane to the frame using the adjustable
fastening system and then mount the frame in the helmet by inserting the three clips.
VISORS
This helmet is provided with the following visors :
CLEAR VISOR (S0): Provides visibility in all conditions.
DARK VISOR (S2): Offers protection against sunlight and glare.
NAME TINT CATEGORY SYMBOL
Clear
White Chrome
(Antifog)
POSSIBLE HELMET CONFIGURATIONS
A. Helmet with LHP skirt and no visor
B. Helmet with LHP skirt and S0 visor
C. Helmet with LHP skirt and S2 visor
WARNING
• Do not use the visor without the skirt mounted on the helmet.
• Do not manipulate visor or skirt while riding.
• If using the visor and skirt, always ensure that they are securely attached to the helmet before
each ride.
• Do not ride with the dark visor in low-light conditions.
• Before riding ensure the buckle is properly secured by pulling the chin strap downward.
• Always ride with the seat stopper frame mounted, even if the silicon part is not present.
• Do not pull on silicone to remove sweat stopper frame.
• Do not use cleaning products on the helmet, use only soap and water to clean the helmet.
WARNING PERIODICALLY CHECK THAT THE VISOR AND SKIRT ATTACHMENT MECHANISM
IS FUNCTIONING PROPERLY (E.G. NO RUST, DIRT OR LOOSING COMPONENTS). DO NOT USE
THE VISOR WITHOUT THE SKIRT MOUNTED ON THE HELMET.
©SCOTT SPORTS SA 2026 All rights reserved. Rev. 01 of 05.2025. The information contained in this
manual is in various languages but only the English version will be relevant in case of conflict.
For all other relevant information, please refer to the user manual for the helmet in question.
S0
S2
TRANSMISSION DESCRIPTION
100% - 80% Clear or slightly tinted
18% – 43% Medium universal filter
D. Helmet with HHP skirt and no visor
E. Helmet with HHP skirt and S0 visor
F. Helmet with HHP skirt and S2 visor
ENGLISH 7 |