VEVOR RM-73 Bedienungsanleitung Seite 8

→turn on the "Particle Alarm".
(8)"Brightness"
①Quick Settings：Adjust the brightness directly at the bottom of the main
interface.(Default 80%, 1% -100% adjustable).
②In the main menu, click "Settings"→
100% adjustable,and click "OK" (Swipe right to cancel brightness
adjustment).
(9)"Lock"
Click "Lock" in main menu, and it will lock and back to the measurement
interface. " "displayed in the upper left corner at the same time. When
you click the screen again, the unlock confirmation interface will pop up.
(10)"About"
Click "About" in main menu, and it contains "Device Name", "Product
Model", "D/N:Device Name", and "Version".
(11)"Unit"
Click "Settings " in main menu→ "Unit" →Temperature： " ℃" or " ℉",
Radon：" Bq/m³" or " pCi/L".→Click "OK " to confirm.
(12)"Sleep"
Click " Settings " in main menu→ " ECO "→ "Sleep", default 10minutes
(contains 30seconds, 1minutes, 2minutes, 5minutes, 10minutes and
15days.
Power consumption can be greatly reduced after sleep (will not affect
data monitoring).Can be woken up by touching the display, plugging in
USB or short pressing the "
(13)"Time&Date"
Click " Settings " in main menu→"Time&Date"→You can set the year,
month, and day.→Click "Next"→You can set the hours, minutes, and
"ECO"→ "Brightness"→1% to
".
- 7 -