VEVOR RM-73 Bedienungsanleitung Seite 5

● Update detection data every 10 minutes. The value of the latest hour is
the real-time measurement value of the current environment. At the same
time, it records various viewing data such as "Accumulate Average Value",
"Latest 12h Value", "Latest 24h Value",etc.
● You can set the radon concentration alarm threshold and alpha particle
sound.
●Automatically start re-measurement when powered on, or manually
re-measurement.
● After shutting down or restarting the measurement, the data will be
automatically saved, and the corresponding PDF data report can be
obtained by connecting the computer.
● The detector can be connected to a computer or mobile phone to
automatically generate a PDF report, which can record up to 508 days of
historical data.
● Save energy automatically. If there is no operation for 1 minute, it will
automatically enter ECO mode.
● In the screen sleep state, the device enters the low power mode, but can
still perform normal data monitoring, data recording and radon
concentration alarm.
● It has a self-check sensor fault prompt function.
● When an abnormality occurs, "Device failure" or "Failure" is displayed.
● With a calendar clock function, the clock runs normally after shutdown.
5.Parameters
● Sensor：High precision radon ionization chamber sensor
● Range：2Bq/m³-20kBq/m³(0.054pCi/L~540pCi/L)
● Precision：±10%
● Reliable data to measure time：1hour later
● Battery operating endurance：About 12 days
- 4 -