pro user RVC7040N Bedienungsanleitung Seite 5

B. On roof
1. Before mounting
2. Position the stand
3. Stick the double-side
screws into the roof.
4. Fix the stand to the
Monitor 12V/24V connection
Please make wiring
1. Connect Red wire to ACC (+)
Connect Black wire to GND (-)
Connect BAT + cable to battery.
2. Connect the wireloom
NOTE:
Under extreme bright
stabilize. Please wait until the images
Occasionally, a few highlights
common phenomenon
indicate any defects
problems, please turn
dealer. The monitor
damage and void the warrantee.
High voltage is present
professionals
the monitor, clean the roof surface
to the roof surface
tape foam at the bottom
roof with offered
for the monitor power
to the monitor.
light conditions, the screen
has stabilized
or dark spots may occur on the LCD screen.
in active matrix display
or faults. Never try to repair
off the display at once and notify
is a complex device.
within the monitor.
well.
which suits your requirement.
of the stand.
screws.
as follows.
image may take a few seconds
before driving.
technology, and doesn't
this device
our company
Any disassembly or modification
The opening of the case should
5
Alternatively screw
This is a very
necessarily
by yourself. In case of any
or authorized
may lead to
be by
in the
to