Canopy Installation - Espiro Code Bedienungsanleitung

PL DE RU SK CZ UA BG HU EN ES IT
UNFOLDING THE STROLLER WITH SEAT ATTACHED
35. Release the lock latch on the le side of the frame.
Pull the frame upward un l all locks click into place.
Before use, ensure both locks are properly secured.
36. Posi on the backrest in an upright posi on and raise the safety bar.
FOLDING THE STROLLER FRAME
The CODE stroller is equipped with an automa c folding system.
Insert the telescopic handle into the frame and unlock the wheels.
37.Press the bu ons on both sides of the frame, simultaneously moving the folding handles
outward.
Gently push the handle down un l the frame folds automa cally.
The stroller will self-secure upon folding.
CARRYCOT
CARRYCOT SETUP
38. Unfold the carrycot rods un l they click into place.
39. A ach the carrycot liner using the zipper and place the ma ress inside.

CANOPY INSTALLATION

40. A ach the canopy to the carrycot frame.
41. Zip the canopy under the carrycot frame.
42. Zip the canopy to the carrycot to secure it.
CANOPY ADJUSTMENT
43. Pull the canopy handle to the desired posi on un l it locks.
44. To adjust the canopy, press the bu ons on both sides of the carrycot canopy and set it to
the desired posi on.
45. To expand the canopy further, unzip the extension (1).
46. Press the bu ons on both sides of the canopy regulator and adjust as needed.
47. Posi on the canopy as desired.
FOOT COVER FOR CARRYCOT
48. A ach the foot cover to the carrycot using the zipper.
CARRYCOT INSTALLATION AND REMOVAL
The CODE carrycot can be installed directly on the stroller frame or using height adapters.
49. Posi on the carrycot with the canopy facing the front of the frame, and insert it into the
slots on both sides of the frame un l it clicks securely.
Note: Ensure the carrycot is securely mounted on the frame.
USING ADAPTERS FOR CARRYCOT