espiro CODE Bedienungsanleitung Seite 101

INFANT CAR SEAT INSTALLATION AND REMOVAL
Car Seat Installa on:
57. A ach the adapters to the stroller frame by sliding them into the slots. Ensure they are
securely locked.
58.Posi on the car seat rear-facing, then insert it into the adapters 1 un l you hear a click. Press
the bu ons on both sides of the car seat and fold the carrying handle 3.
Note: Ensure the car seat is securely installed.
CAR SEAT REMOVAL:
59. Press the bu ons on both sides of the car seat (1) and li the handle (2). Press the release
bu ons and simultaneously pull the car seat from the adapters.
ADAPTER REMOVAL:
60. Remove the adapter by pressing the bu on (1) and pulling it from the frame (2). Repeat on
the other side.
CLEANING AND OPERATION
Plas c parts of the stroller and the belts can be cleaned with a so , damp cloth. Do not
use strong washing agents.
Clean metal parts with a dry cloth, removing dust and water. If muddy or a er driving
in the winter, maintain with a lubrica ng product.
Upholstery cleaning manual: - Clean using a cloth with mild cleaning agent, do not wet
it, do not whirl, dry unfolded.
Periodically check bolt clearances and replace damaged parts. Lubricate running gear
components, i.e. wheel hubs, axles, preferably using a common prepara on e.g.
silicone grease, especially a er driving on sandy terrain or in winter. Aggressive agents
can cause corrosion. Remember to maintain all metal components as well.
PL DE RU SK CZ UA BG HU EN ES IT