Ip Camera Is Not Powering An - Reolink Rlc-511Wa Betriebsanweisung

Tr٠٧b!esh٠٠tlng
IP Camera Is not Powering an
!f you find your camera !s not powedng on, try the fo‫اا‬ow‫ا‬ng solut!ons:
٠ Please check whether the outlet Is working properly or not. fry to
plug the camera into a different outlet and see if it works,
" Please check whether the DC adapter is working or not. If you have
another 12V DC power adapter which is working, please use another
power adapter and see if it works.
Ifttiese won't work, please contact Reolink Support
https://support.reolInk.com
IR LEDs Stop Working
If you find the IR tEDs of your camera stop working, try the following
solutions:
" Go to Device Settings and check whether you tiave enabled Infrared
lEDs. If the lEDs are disabled, please enable them.
٠ Please go to live View and check the Day/Night mode. Set the mode to
Auto to activate the IR lights.
" Upgrade your camera's firmware to the latest version.
٠ Restore the camera to the factory settings and check the IR light
settings again.
11 ‫ ا‬English