Elentek EXPRESS PRO Bedienungshandbuch Seite 84

The set number of starts/hour has been exceeded.
ALARM
MAX. STARTS HOUR
If set, the alarm stops the motor
The display and the red LED flash, activating the cumulative alarm
output and the 'BUZZ' output.
ALARM
With analogue sensor activated, it indicates that the set alarm
ANALOGUE LEVEL
threshold has been reached;
in the event of PRESSURIZATION operation, the alarm stops the motors;
in the event of DRAIN operation, the alarm does not stop the motors;
in the event of FILL operation, the alarm does not stop the motors;
The display and the red LED flash, activating the cumulative alarm
output and the "BUZZ" output.
The system automatically resets 5" after the set alarm level has
returned.
40